How to Build a DIY Split Runway Fence

Posted on Oct 12, 2022

How to build a split rail fence

Dissever rails fences are the simplest and virtually economical type of contend. They are traditionally used in agricultural settings, simply they've go extremely popular in suburban yards recently. Split rail fences are not particularly secure, so they are generally installed as decorative fences, used to create a edge around an expanse. Notwithstanding, by covering the fence with welded wire, it is possible to employ dissever rail fences to keep pets in your chiliad.

Adding a divide rail contend to your m enhances its appearance with natural, rustic beauty. Because the design is then simple, a split rail argue is like shooting fish in a barrel to build yourself, even for first time DIYers. Hither are the easy steps to building a split rail fence.

Wait! Before You Beginning Your DIY Argue Project…

A split rail fence and its end post.Earlier start your DIY fence projection, in that location are a few considerations that are the same when edifice any style of fence. It'due south important to be a good neighbor, you lot should cheque your property lines to ensure that where you lot're building is indeed your property. Every bit long as yous're complying with laws and only building on your own property, it is non required that you check with your neighbors earlier putting upwardly a argue. Withal, it certainly doesn't hurt to alarm them of your plans. Yous should also check your utilities outset and brand sure y'all're not interfering with any cable or electric lines.

Choosing a Fashion of Divide Rail Fence

In colonial America, divide rail fences were built by laying logs on top of i another in a zigzag formation, like this:

A zigzag split rail fence.

Today's suburban fences are typically created with a different pattern, involving runway that fit through the holes on posts. Split rail fences unremarkably accept between two and 4 track. As well, different in colonial times, information technology is no longer necessary to chop down trees and split the rails yourself. Y'all can now purchase precut rails and fifty-fifty argue kits that brand assembly a cakewalk.

The virtually common textile used is cedar, and pino is also very popular. Standard rail length is either xi or 8 feet, but information technology varies. The measurements of your m may impact the rail length you choose.

Make Sure You Have These Materials

Tools:

  • Stakes and string
  • Gravel
  • A post hole auger
  • Carpenter's level
  • Measuring tape

Fence materials:

  • End posts: These posts accept holes drilled on only 1 side for inserting the rails. They're the stopping points of your contend.
  • Line posts: These posts are drilled all the mode through, and they connect portions of your contend that continue in a straight line, as opposed to the corners.
  • Corner posts: These posts are drilled for the right angles of your fence.
  • Contend rails

Steps to Building a DIY Split Runway FenceA split rail fence along a suburban road.

  • Mark and measure out your yard to ensure that your argue materials fit. This is where your stakes, string, and measuring tape will come up in handy. You may need to add together shorter sections at the end of your argue. If you're using precut rails and don't want to chop any forest, in that location are other ways to brand your debate fit. You lot have flexibility with the spacing of whatsoever openings in your fence equally well equally the size of your gate if you lot add one.
  • Dig your post holes with your post hole auger. Holes should be half-dozen inches deeper than you demand.
  • Fill half-dozen inches of the holes with gravel. This helps absorb wet from the ground.
  • Starting with the stop posts, insert posts into the holes. Then, fill in whatsoever gaps with the surrounding soil. Using your level, make sure each post is directly. You tin can become out your string again to check that the tops of each mail service are the same peak as you install line posts and corner posts. Besides, make certain that the holes are facing the right direction when you place your posts.
  • Insert your rail into the holes of the posts, and voila! You now have a carve up track fence.

Wasn't that easy? Divide rail fences can be installed in but a few hours, so just option an afternoon, and soon you'll have your own DIY split runway contend. Then, yous can do the virtually of import pace: enjoying your make new fence!

download our diy fencing eguide

To gild fence parts or schedule professional installation,
phone call 800-431-4303 or contact us online!